LIQUID ORGANIC FERTILISER

Slurry tankers and application implements

From high-capacity SAMSON systems to simpler vacuum tankers.

View solutions

FIRST CHOICESAMSON

When work rate, fast filling and high flow to the applicator are priorities.

→ SIMPLER SOLUTIONPICHON

When a conventional vacuum tanker is sufficient and lower initial investment is the priority.

→

SAMSON

Two professional platforms. One clear choice.

TG and PG II Genesis follow the same SAMSON philosophy: durable construction, high pump capacity and precise application. The difference becomes clear as implement weight, operating intensity and tanker load requirements increase.

SAMSON TG

A powerful professional tanker without unnecessary complexity.

Suitable for high workloads with spreading booms, trailing-shoe applicators and medium-weight incorporation implements. TG can also be equipped with the PG II 15,500 l/min centrifugal pump.

CHOOSE TG IF power, simplicity and lower cost are the priorities.

18–25 m³tanker class

10 000 l/minstandard pump

15 500 l/minPG II pump as an option

4.5 bardelivery pressure

Hydraulic suspension Steering axles Electronic steering optional Tyre-pressure control optional 3-point linkage up to 3.8 t optional Section-controlled discharge as standard Low operating costs High resale value

SAMSON PG II GENESIS

Ultimate implement carrier.

When the tanker must do more than transport and pump slurry — it must also carry heavy, wide and demanding implements.

CHOOSE PG II IF implement demands and operating intensity become the main requirement.

18–35 m³tanker class

15 500 l/minstandard pump

9 t3-point linkage capacity

HPD / HWDwheel-drive options

Electronic wheel steering Hydraulic suspension Tyre-pressure control For heavy injectors and wide implements Active linkage functions Section-controlled discharge as standard Low operating costs High resale value

STANDARD ON BOTH SERIES

Epoxy protection inside the tank.

The inside of the tank is sandblasted, primed and epoxy coated. In the aggressive slurry environment, this provides a higher level of corrosion protection than a galvanised surface. Both series feature precise automatic rate control based on forward speed, a light and durable construction, low centre of gravity, section-controlled rear discharge, low operating costs and high residual value.

Preciseautomatic rate control

Epoxy coatinginside

Lowoperating costs

Light and durableconstruction

Section-controlleddischarge

Highresale value

PRECISE APPLICATION

The application rate remains consistent as forward speed changes.

The flow meter and automatic control maintain the set m³/ha rate, compensating for changes in forward speed and helping keep application uniform across the field.

AT A GLANCE

Which one fits your operation?

TGPG II Genesis

Tank capacities 15.1–24.9 m³ 15.8–34.5 m³

Flow to applicator Up to 15,500 l/min Up to 15,500 l/min

Filling capacity Up to 6,000 l/min Up to 10,000 l/min

Discharge pump 10,000 l/min standard15,500 l/min available 15,500 l/min standard

Electronic wheel steering Available Standard

3-point linkage Available up to 3.8 t Available up to 9 t

Wheel drive Not available HPD / HWD available

Tyre-pressure control Available Available

Precise automatic rate control Standard Standard

Hydraulic suspension Standard Standard

Ejector AvailableCan be combined with other filling systems AvailableCan be combined with other filling systems

SAP 1 Available Available

SAP 2 Available Available

Pump Tower Available Available

Front Filling System Not available Available

Central lubrication Available Available

Internal epoxy coating Standard Standard

Low centre of gravity / optimised weight distribution Standard Standard

Section-controlled rear discharge Standard Standard

FILLING SYSTEMS

A filling system matched to your storage and operating rhythm.

The right filling system reduces downtime and fuel consumption while increasing work rate.

External filling

The simplest solution when slurry is pumped into the tanker by a stationary or mobile pump.

TG / PG II

Ejector

Rapidly creates up to −0.9 bar vacuum in the suction pipe. Once the liquid reaches the centrifugal pump, the centrifugal pump continues the filling process.

CAN BE COMBINED WITH OTHER FILLING SYSTEMS

SAP

Side suction arm for fast filling from a storage tank or connection without leaving the cab.

TG / PG II

Pump Tower

Integrated pump tower for filling from open stores and transport tankers.

TG / PG II

Front Filling System

Front filling keeps the rear free for the implement and an efficient workflow.

PG II ONLY

SAMSON TG

Choose TG if:

you will work with a spreading boom, trailing-shoe applicator or grassland/soil incorporation implements;
you want SAMSON high-capacity centrifugal pumps, precise automatic rate control and Ejector technology;
you do not need the PG II 9 t linkage, wheel drive or operation with exceptionally heavy implements;
you want a professional SAMSON tanker with a lower initial investment than PG II.

TG — a powerful professional tanker.

SAMSON PG II GENESIS

Choose PG II if:

you plan to work with heavy injectors and incorporation implements;
you need a 3-point linkage with up to 9 t capacity;
you need HPD / HWD wheel drive or the Front Filling System;
the tanker will be used intensively for contracting or on a large farm.

PG II Genesis — a tanker and carrier platform for heavy implements.

PICHON

A straightforward galvanised vacuum tanker backed by SAMSON technology.

For lower initial investment and simpler operation. PICHON is part of the SAMSON Group, and several key components use SAMSON technology.

Fully galvanised, durable steel construction with low maintenance requirements
Simple and proven vacuum technology up to −0.9 bar
Centrifugal pump available for applicator feed
Side suction arm with centrifugal pump available
Depending on configuration, selected SAMSON implements can also be used

Discuss a PICHON option

PICHON galvanised vacuum tanker in the field

APPLICATION AND INCORPORATION IMPLEMENTS

SAMSON application technology

SAMSON application technology is developed using practical field trials and international research data to improve nutrient utilisation and reduce ammonia losses.

SURFACE APPLICATION

01 FOR LARGE WORKING WIDTHS

Spreading booms

For high work rates and large working widths, distributing slurry evenly through hoses close to the ground.

very large working widths;
suited to large areas and high daily output;
working-width and section control available.

SB ADS · 12–18 m SBX2 · up to 30 m SHB4 · up to 36 m

CLOSE TO THE CROP

02 GENTLE APPLICATION AT SOIL LEVEL

Trailing shoe

Slurry is placed in narrow bands at soil level and closer to the root zone, working gently in grassland and growing crops.

less crop contamination;
precise placement directly at soil level;
large working widths for intensive operation.

TSB1 · 7.5–9 m TSB2 · 15–24 m

GRASSLAND AND GROWING CROPS

03 TARGETED INJECTION

Injectors

Targeted slurry placement into the soil with minimal soil disturbance — particularly for grassland and crops where precise injection matters.

single- or double-disc solutions;
placement close to the root zone;
working widths up to 12 m.

IDs 8 TS · 8 / 12 m TD · 8 / 12 m

SOIL CULTIVATION + FERTILISATION

04 IN ONE PASS

Incorporation implements

Slurry incorporation and soil cultivation in one pass — from stubble cultivation to deeper Strip-Till application.

tine and disc implements for different soil conditions;
typical working depths from 3 to 15 cm;
Strip-Till solution for deeper 20–30 cm cultivation.

CM / CM HD CDf / SD II / CDx Strip-Till

All implements are equipped with SAMSON distributors. SAMSON-developed vertical distributors provide precise high-flow distribution across the hoses, strong resistance to foreign objects and straightforward maintenance.

PRODUCTIVITY REFLECTED IN COSTS

The goal is not the cheapest tanker. The goal is the lowest cost per m³ applied.

Less fuel. Less downtime. Lower nutrient losses. More precise rate control and more value from every m³ applied. High residual value. These are the factors we consider when configuring a SAMSON system for your farm.

X-Agro 27051552 Machinery and consultation